Adams Building Set AQT SERIES User Manual
6.0 WEIGHING
6.1 BEFORE
WEIGHING
Be aware of the Automatic power-off function. If the Automatic power-off
function is active it will turn the balance off after 2 minutes of inactivity.
function is active it will turn the balance off after 2 minutes of inactivity.
6.2 WEIGHING
PROCEDURES
• Press [On/Off] to turn on the balance.
When power is turned on, all display segments appear on LCD for a
few seconds and finally on the display
few seconds and finally on the display
"
0.00
"
will appear along with
the last selected units.
• Select the weighing unit with [Unit].
Press [Unit] to select a weighing unit, eg. "g" / "ct" / "oz" or "dwt" .
Once the unit has been selected, the weight will be displayed in the
selected unit and a symbol for the weight will be shown.
Once the unit has been selected, the weight will be displayed in the
selected unit and a symbol for the weight will be shown.
• Start weighing
• If you do not use a container for weighing
Verify the reading is
"
0.00
".
If not, press [Tare] to display
"
0.00
".
Place the objects on the weighing pan to weigh.
When the reading becomes stable, the stable indicator is displayed.
When the reading becomes stable, the stable indicator is displayed.
• If you use a container for weighing
Place an empty container on the pan.
Wait for the stability indicator to be displayed and press [Tare].
Place the objects to be weighed in the container.
When the reading becomes stable, the stable indicator is displayed.
Only the net weight is displayed.
Wait for the stability indicator to be displayed and press [Tare].
Place the objects to be weighed in the container.
When the reading becomes stable, the stable indicator is displayed.
Only the net weight is displayed.
© Adam Equipment Company 2006
7