ADC P-80-412 User Manual
ADCP-80-412
x Issue 1 x April 2000
1074399 Rev A
Page 1
2000, ADC Telecommunications, Inc.
DSX Bay Tracer Illuminator
User Manual
13914-B
Content
Page
INTRODUCTION .......................................................................... 1
INTRODUCTION
This guide describes the ADC DSX Bay Tracer Illuminator option used in large DSX-1 or
DSX-3 environments to enable technicians to locate far end LED tracer lamps more quickly.
DSX-3 environments to enable technicians to locate far end LED tracer lamps more quickly.
The Bay Tracer Illuminator option consists of a stand-alone electronic sensor device that
mounts on the top of a DSX-1 or DSX-3 bay, and an inductive pick-up coil that mounts on
one or more –48 Vdc power input conductors feeding the bay fuse panel. Power to operate the
Bay Tracer Illuminator option is obtained from a branch of the same –48 Vdc central office
source that powers the components in the DSX-1 or DSX-3 bay.
mounts on the top of a DSX-1 or DSX-3 bay, and an inductive pick-up coil that mounts on
one or more –48 Vdc power input conductors feeding the bay fuse panel. Power to operate the
Bay Tracer Illuminator option is obtained from a branch of the same –48 Vdc central office
source that powers the components in the DSX-1 or DSX-3 bay.