Actiontec R1524SU Quick Setup Guide

Unplug all of the existing Phone

Cords from their current Phone Jacks.

Plug a Phone Filter into every

Phone Jack in your home.

Note: DO NOT plug a Phone Filter into the Jack on the wall near your computer.

Plug the loose end of the existing

Phone Cord into a Phone Filter and
keep the other end connected to the
Phone (or fax machine, caller ID, or
answering machine) itself.

Find the Phone Cord that is

connected to the Telephone next to
your Computer. Unplug this Phone Cord
from the Phone Jack that it is currently
plugged into. Keep the other end 
connected to the Telephone itself.

Note: DO NOT unplug the DSL Cable from the Phone Jack near your computer.

Note: DO NOT unplug the DSL Cable from the Phone Jack near your computer.

These instructions will change based on your location.
If you are located in the United States, please go to the "U.S.
Customers ONLY" section.

If you are NOT located in the United States, please go to the
"Non-U.S. Customers ONLY" section.

Note: If the Internet light continues to blink, confirm that you have received
notification from your DSL Provider that your DSL service is ON. Otherwise,
contact your DSL Provider immediately.

Get your DSL Gateway from

your DSL Quick Start Kit and take it out
of the bag.

Plug the larger end of the Power

Cord into a Power Outlet.

Confirm that the Power light

on the DSL Gateway is 

. This

may take a few moments.

Now get the black DSL Cable.

Plug one end of the DSL Cable

into the GREEN Port, labeled “Line”,which
is located on the back of the DSL
Gateway.

Plug the other end of the DSL

Cable into the Phone Jack closest to
your computer.

Confirm that the Internet light

on the DSL Gateway is SOLID 

.

(This may take up to 30 seconds.)

Confirm that the Power and one

of the Ethernet Network lights on the
Cable/DSL Router are SOLID 

.

(This may take a few moments and the
Gateway light may flash.)

Phone Filters are connected to all of the Phone Jacks in your
home to allow you to talk on the phone and be online at the
same time. Every phone in your home with the same phone
number as your DSL line will need a Phone Filter.

Get the CLEAR Bag and take out the Phone Filters.

Get the BLACK bag and remove

the Power Cord and black DSL Cable
from the bag.

Plug the smaller end of the

Power Cord into the Black Port located
on the back of the DSL Gateway.

This port is circular and marked “Power”.

Note: The number and type of Phone Filters included in this kit may vary. It is
dependent on your Internet Service Provider.

If you have a monitored home security alarm,
please contact your Security System Provider to
schedule a visit to your home for installation of a
Phone Filter on the Alarm.

Get the Yellow Cable from your

DSL Quick Start Kit.

Connect one end of the Yellow

Cable into the Yellow Port on the back
of your DSL Gateway. You will hear a
“click” when the Yellow Cable has been
connected properly.

You can plug the Yellow Cable into any
open Yellow Port.

Plug the loose end of the Yellow

Cable into the Ethernet Port located
on the back of your computer. You will
hear a “click” when the Yellow Cable has
been connected properly.

The Ethernet Port looks similar to a regular
Phone Jack but is slightly larger.

Stock# 0530-0405-000

Note: The pictures included in this Section are for the 4-port DSL Gateway.,If you have
a DSL Gateway with 1 Yellow Port,some of the pictures may not match your installation.