Actiontec HPE400AVP Quick Setup Guide
Note: An Ethernet port looks similar to a phone port but is slightly larger.
Step
1
Get the MegaPlug AV
200 Mbps Powerline Ethernet
Network Adapter from the box.
Network Adapter from the box.
Step
5
Plug the other end of the
Ethernet Cable into an OPEN
Ethernet Port on your Broadband
Modem or Router.
Ethernet Port on your Broadband
Modem or Router.
Step
4
Plug the MegaPlug
Adapter into a Power Outlet.
Do NOT plug the Adapter into a
power strip or wall outlet that uses
surge protection as the Adapter
may not work.
power strip or wall outlet that uses
surge protection as the Adapter
may not work.
Flip this Quick Start Guide over to continue
NEXT
Step
2
Get one Ethernet Cable.
Step
3
Plug one end of the
Ethernet Cable into the Ethernet
Port on the bottom of the
MegaPlug Adapter.
Port on the bottom of the
MegaPlug Adapter.
Step
6
Get the MegaPlug AV
200 Mbps 4-Port Switch from the
box. You will connect the 4 Port
Switch to the device(s) that you
want to have Internet access.
box. You will connect the 4 Port
Switch to the device(s) that you
want to have Internet access.
Questions? Call 1-888-436-0657 (USA)
Questions? Call 1-888-436-0657 (USA)
Questions? Call 1-888-436-0657 (USA)
Step
7
Get the Black Power
Cord.
Step
10
Get the other
Ethernet Cable.
Step
8
Plug one end of the
Power Cord into the back of the
MegaPlug 4-Port Switch.
MegaPlug 4-Port Switch.
Step
9
Plug the other end into a
Power Outlet.
Do NOT plug the Switch into a
power strip or wall outlet that uses
surge protection as the Switch
may not work.
power strip or wall outlet that uses
surge protection as the Switch
may not work.
Part No: 0530-0602-000
QS1024/0309
Broadband
Router
Router