ACR Electronics ZE-NES14 User Manual

44

TRIM RING INSTALLATION
■

  Attach  the  trim  ring  around  the  front  panel  with  two  indentions  on  one  side  facing 

upwards.

1.  Push the trim ring upward and pull out the upper part.

2.   Push the trim ring downward and pull out the lower part.

1.  Unscrew the 4 pieces M2 x 2 screws.

2.  Use a screw driver to bend straight the bended mounting tab and tip out the unit from 

the mounting bracket.

3.  Pull out the unit from the mounting bracket with both hands.

Unscrew 4 

attached screws

Remove the rubber sheath