Dynex DYNEX DX-BPDVD7 User Manual
7" Portable DVD Player
11
Playing video and audio discs
Turning on the player
To turn on the player:
1 Open the LCD screen.
2 Turn on the player. The power LED lights green and the LCD screen turns on.
2 Turn on the player. The power LED lights green and the LCD screen turns on.
Playing discs
To load and play a disc:
1 Press the OPEN button to open the disc tray.
2 Hold the edges of the disc and place the disc in the center of the tray with the label
2 Hold the edges of the disc and place the disc in the center of the tray with the label
side up.
3 Press the OPEN button to close the disc tray. The player starts playing the disc.
4 Turn the VOLUME knob to adjust volume (even when using headphones).
4 Turn the VOLUME knob to adjust volume (even when using headphones).
If the player is connected to a TV or an amplifier, adjust the volume on the connected
device.
device.
5 Stop playback by pressing the STOP button on the player or remote control.
Pausing discs
To pause a disc:
1 When playing a disc, press
(play/pause) to pause playback.
2 Press
(play/pause) again to resume playback.
Removing discs from the player
To remove a disc from the player:
1 Press the OPEN button to open the disc tray, then remove the disc.
2 Press the area on the DVD disc tray marked CLOSE to close the disc tray, then turn off
2 Press the area on the DVD disc tray marked CLOSE to close the disc tray, then turn off
the player.
Using with headphones
You can also use the player with headphones (optional) by plugging the headphones into the
headphone jack on the left side of the player. Plugging headphones into the headphone jack
disables the internal speakers.
headphone jack on the left side of the player. Plugging headphones into the headphone jack
disables the internal speakers.
Warning: To avoid damaging your hearing, set the volume to a low level before putting on
the headphones, then adjust the volume up to a comfortable level.