Dynex DX-UPDVD2 User Manual
14
DX-UPDVD2
Using your DVD player
Power source
Use the polarized AC line cord provided for operation on AC power. Insert the AC cord plug
into a standard 120 V 60 Hz polarized AC outlet.
If you cause a static discharge when touching your player and your player fails to function,
unplug your player from the AC outlet and plug it back in. Your player should return to
normal operation.
into a standard 120 V 60 Hz polarized AC outlet.
If you cause a static discharge when touching your player and your player fails to function,
unplug your player from the AC outlet and plug it back in. Your player should return to
normal operation.
Warnings:
• The player uses a polarized AC plug with one wide blade and one narrow blade. The
plug will only fit into matching polarized power outlets. This is a safety feature to
reduce the possibility of electric shock. If the plug will not fit in your power outlets, you
probably have outdated, non-polarized outlets which should be changed by a
qualified, licensed electrician. Do not file the wide blade on the plug or use an adapter
to make the plug fit into your outlet.
reduce the possibility of electric shock. If the plug will not fit in your power outlets, you
probably have outdated, non-polarized outlets which should be changed by a
qualified, licensed electrician. Do not file the wide blade on the plug or use an adapter
to make the plug fit into your outlet.
• Never connect the AC cord plug to other than the specified voltage (120 V 60 Hz). Use
the attached power cord only.
Turning your player on and off
To turn your player on and off:
1 Plug the power cord into an AC power outlet.
2 Press the STANDBY/
2 Press the STANDBY/
button to turn on your player.
3 Press the STANDBY/
button again to turn off your player.
P
l
ay
i
ng a disc
To play a disc:
1 Turn on your player and your TV.
2 Press OPEN/CLOSE (
2 Press OPEN/CLOSE (
) to open the disc tray.
3 Load the disc into the tray, with the label side up.
4 Press OPEN/CLOSE (
4 Press OPEN/CLOSE (
) to close the tray. Playback starts automatically. If playback
does not start, press
(play/pause)
on the remote control or the player to start the
playback.
• To stop the playback, press
(stop)
. The player notes the stopped point,
depending on the disc.
• Press
(play/pause)
to resume playback (from the stopped point). To start
playback from the beginning of the disc, press
(stop)
again, then press
(play/pause)
. Your player starts playback at the beginning of the disc.
• During playback, press
(fast forward)
to fast forward through the disc. Each
time the
(fast forward)
button is pressed, the fast forward motion speed
changes. Press
(play/pause)
to resume normal playback.
DX-UPDVD2 09-0463_MAN_ENG_V1.fm Page 14 Tuesday, July 14, 2009 9:20 AM