Dualit Juice Extractor ib_140809.qxp User Manual
2
1
0
2
1
0
9
8
USING YOUR JUICER
ALWAYS USE THE PLUNGER TO PUSH FOOD DOWN THE FEED TUBE.
THE FOOD MUST BE FED IN WHILST THE MOTOR IS IN OPERATION.
THE FOOD MUST BE FED IN WHILST THE MOTOR IS IN OPERATION.
Insert the froth filter into the
jug and place assembled jug
under the spout.
jug and place assembled jug
under the spout.
Start the juice extractor by
pressing the power button
“1” for soft foods or “2” for
hard foods.
pressing the power button
“1” for soft foods or “2” for
hard foods.
1
2
3
Fresh juice will flow into the
juice container and the pulp
will collect in the pulp
container.
juice container and the pulp
will collect in the pulp
container.
To stop juicing press the off
button “0”.To serve pour
slowly into a glass or jug.The
froth will remain in the juice
container leaving delicious
fresh juice.
button “0”.To serve pour
slowly into a glass or jug.The
froth will remain in the juice
container leaving delicious
fresh juice.
4
5
PLUG IN
JUICE CONTAINER
TURN OFF
TURN ON
JUICE
Insert the prepared fruit or
vegetables into the feed tube
and gently push down with
the plunger. NEVER USE
YOUR FINGERS.
vegetables into the feed tube
and gently push down with
the plunger. NEVER USE
YOUR FINGERS.
4
INSERT
Plug in the juicer, the power
indicator will flash red when
in standby mode.
indicator will flash red when
in standby mode.
CLEANING YOUR JUICER
CLEAN IMMEDIATELY AFTER EVERY USE. DO NOT USE ABRASIVE
CLEANERS. NEVER IMMERSE OR RINSE THE MAIN BODY IN WATER.
CLEANERS. NEVER IMMERSE OR RINSE THE MAIN BODY IN WATER.
Unplug the juicer and then
lower the safety locking arm
to unlock the lid.
lower the safety locking arm
to unlock the lid.
Remove the lid and wipe any
excess pulp into the pulp
container.
excess pulp into the pulp
container.
Remove the pulp container
by tilting back and away.
Empty and clean thoroughly.
by tilting back and away.
Empty and clean thoroughly.
Remove the mesh filter by
lifting the work bowl, this will
unlock the mesh filter. Then
lift the mesh filter up and
out.
lifting the work bowl, this will
unlock the mesh filter. Then
lift the mesh filter up and
out.
Take caution when cleaning
the mesh filter as the blades
are sharp. Use the brush to
clean the filter.
the mesh filter as the blades
are sharp. Use the brush to
clean the filter.
Clean all the parts in contact
with food using warm soapy
water and a soft brush. If using
a dishwasher see cleaning tips
on page 10.
with food using warm soapy
water and a soft brush. If using
a dishwasher see cleaning tips
on page 10.
1
2
5
3
4
6
PLUG IN
REMOVE LID
CLEAN AFTER
EACH USE
EACH USE
REMOVE PULP
CONTAINER
CONTAINER
CLEANING THE
MESH FILTER
MESH FILTER
REMOVING WORK
BOWL AND FILTER
BOWL AND FILTER
juicer ib_140809.qxp 19/02/2010 15:16 Page 8