Dualit Blender DBL3 User Manual

Page of 12
ASSEMBLING YOUR BLENDER
USING YOUR BLENDER
•  Do not plug in until you have 
assembled your blender and 
unplug straight after use 
•  Prior to first use, wash lid, jug and 
blade unit
•  Place the jug onto the power base 
•  Push the lid onto the jug and at 
the rear of the lid locate the 
plunger into the Safety Interlock 
•  The Dualit blender has a double 
Safety Interlock that prevents the 
motor running unless the lid and 
blade is correctly in  position 
•  Remove cap and add ingredients 
only at slow speeds. When using at
high speed, with a full jug or with 
warm contents, stop blender and 
then add ingredients
•  The filler cap doubles up as a key 
for removing the blade assembly 
from the Jug for cleaning
8
•  Plug power cord into earthed 
socket. Blender is now ready for 
use. Please Note: The Red 
power light indicates that there is 
power to the Blender. This light 
changes to a Green light 
when the blades are running
•  Place fully assembled jug onto 
power base
•  Insert foodstuffs into the jug
•  Attach lid, ensuring the safety 
plunger is in place. Keep hand on 
rear of lid to ensure safety switch is
engaged
•  Switch unit on, the power light 
will slowly flash red
•  Turn speed control knob to desired
setting
•  Press the start/stop button, the red
flashing light, will turn to solid 
green and the blades will rotate
•  To turn off, press the start/stop 
button again, the power light will 
return to flashing red
•  To pour, using the handle, lift the 
jug vertically upwards off the 
blender base, remove the lid to 
pour
•  The speed can be adjusted when 
blending by turning the speed 
knob in either direction
•  All speeds can be used with pulse 
button. On the speed control knob
1 is slow 5 is fast
•  When blending warmed foods, do 
not add ‘hot’ liquids to glass jug. 
Always allow liquid to cool 
below 60°c before adding to 
the jug 
and place a gloved hand 
over the lid and only operate on 
slow speed
•  Do not insert frozen foods into jug
taken directly from a hot dish
washer
BLENDING
FILLER CAP / BLADE KEY
2007.9.18_DBL3_ blender manual.qxp  18/09/2007  11:44  Page 8