Doro 930R User Manual

speak after the tone.” to end recording release the button.

About the answering machine

The answering machine has to be turned on in order to receive messages. On 

incoming calls the answering machine will respond after the selected number of 

rings (please refer to page 30).

When the answering machine answers the incoming call the caller will hear 

your outgoing message (OGM) followed by a tone, at this point they can leave 

a incoming message (ICM) up to 3 minutes in length. Should the caller exceed 

this limit the call will be terminated. The memory can store up to 8 minutes of 

incoming messages. 

If the answer function is set to Answer only (ANN) the caller will not be able to 

leave a message, as the call will be disconnected once the outgoing message has 

been played.

Most functions can be performed from either base unit or handset.

The caller can also record their message in a specifi c mailbox (please refer to 

page 33), all voice mails are in English.

The display on the base unit can show the following messages:

The display shows

Function

C /0-9 (fl ashes) ...................... Time and date requires programming, see 

page 30

0-9.......................................... The answering machine is ON, the number of 

messages being displayed

9 (fl ashes)................................ The answering machine is ON, with more than 

nine messages recorded

- /0-9 (fl ashes) .................... The answering machine is off

A (fl ashes)................................ Remote control access in progress (internal or 

external)

E (fl ashes) ................................ Temporary fault, disconnect the mains adapter 

and telephone line for 1 minute

F (fl ashes) ................................ Memory full

P (fl ashes)................................ Pause during playback

P/1 ............................................ Normal answering function selected

P/2........................................... Answer only (ANN) function selected

r ............................................... Recording in progress, please wait

t , 2-9 .................................... Setting the number of rings before the machine

answers an incoming call

H............................................... Maximum volume