Dish DuoDVR ViP 722k User Manual

channel lists. To change the channel display, you must first scan for over-the-air channels 
(refer to Scanning for Over-the-Air Channels on page 118).

 

1

Press MENU, select System Setup, and then Local Channels.

2

Select Chan Display.
Note: Changing the channel display preference may cause timers on those channels to be 
lost. Review your timers list after making any changes (refer to Using the Timers List on 
page 53).

3

Choose a preference for how local channels display in the Program Guide and other 
channel lists under Local Sat Channels:

HD Priority—display only HD versions of the local channel below 100 at the local 
station’s channel number. If an HD local channel is not available, the SD channel is 
listed.

SD Only—display only SD local channels below 100. HD channels display in the four-
digit channel range.

HD and SD (default)—display both HD and SD local channels at the local station’s 
channel number.

Disable—HD and SD local channels are found only in the four-digit channel range. 

4

Choose a preference for how DishHD channels display in the Program Guide and other 
channel lists under DishHD channels:

Enable (default)—DishHD channels display at the SD channel number.

Disable—DishHD channels display in the four-digit channel number.

5

Select Done on the Channel Display screen.

6

Select Done on the Local Channels screen.

3-4

5-6