Dish DuoDVR ViP 722k User Manual

If your receiver is on for a preset period of time without any activity (for example, no 
channel changes), the Inactivity Standby feature turns off the receiver so that you’ll always 
have the latest Program Guide and DISH On Demand (if available on your model). 
Enabling this feature (recommended) also improves the reliability of your receiver. To 
change the settings for this feature, complete the following:

1

Press MENU.

2

Select Preferences, and then Inactivity Standby.

3

Highlight Activation and use the UP and DOWN ARROW buttons to switch between 
Enabled and Disabled.

4

Highlight Inactivity Duration and use the UP and DOWN ARROW buttons to select the 
amount of time the receiver waits before turning off.

5

Select Done.

Note: Select Defaults to reset the changes you’ve made to this feature.

To take full advantage of Dolby Digital 5.1 surround sound, you need an optical cable 
and a stereo that supports this feature.

To use the Caller ID feature on this receiver be sure to have the receiver connected to 
an active phone line and have Caller ID service from your phone company.

How can I see who has called me in the past? Open your Caller ID History by 
pressing MENU, select System Setup and then Caller ID History.

Why is my audio in another language? You may have selected an alternate 
language. See the instructions on page 98 to change your preferred language.

How can I change the channel order in the Program Guide? You can switch from 
ascending order (lowest to highest) or descending order (highest to lowest) by 
following the instructions on page 95.