Dish DuoDVR ViP 722k User Manual

Put the satellite receiver in Single or Dual Mode by pressing the front panel MODE button. 
Keep the following items in mind when switching the satellite receiver between Dual and 
Single Mode:

Note: If someone is viewing the remote TVs while the receiver is in Dual Mode, you will 
see a popup on the nearby TV warning you that you are about to disrupt the use of the 
TV2 outputs.

The two remote controls give you access to all the features of your satellite receiver. You 
can set up each remote to control the satellite receiver and up to three other devices (see 
page 76). These devices can be a TV, a VCR or DVD player, and a third device.

This section describes how to use the various features on the two types of remote controls 
included with your satellite TV system.

Dual Mode front panel 
indicator lights. 

Single Mode front panel 
indicator lights. 

The Recording front panel 
indicator lights to show 
whether TV1, TV2, or both 
are currently recording.

The TV1 Recording front 
panel indicator lights when 
you are recording from one 
or both tuners.

Favorites Lists set up for 
both outputs (TV1 and TV2) 
are available.

Only Favorites Lists set up 
for TV1 are available. The 
lists for TV2 are not lost, 
they are simply unavailable 
in Single Mode.

Locks set up for both outputs 
(TV1 and TV2) are available.

Locks set up for only TV1 
are available. The locks for 
TV2 are not lost, they are 
simply unavailable in Single 
Mode.

Closed Captioning (CC) 
from SD and HD 
programming is available on 
TV1. CC from only SD 
programming is available on 
TV2 (CC must be enabled 
on the TV).

Closed Captioning from the 
receiver is available on 
both outputs (TV1 and 
TV2).