Dixon Aficio 1515 User Manual
Immediate Transmission
19
2
Immediate Transmission
With Immediate Transmission, when
you press the
you press the
{{{{Start}}}} key, the fax
number is dialed immediately. The
message is scanned and transmitted
page by page without being stored in
memory. This contrasts with Memory
Transmission which scans all pages
into memory before dialing the desti-
nation.
Immediate Transmission is useful if
you want immediate confirmation
that the message is being sent to the
correct destination (just check the oth-
er terminal's Own Name or Own Fax
Number on the control panel during
transmission).
message is scanned and transmitted
page by page without being stored in
memory. This contrasts with Memory
Transmission which scans all pages
into memory before dialing the desti-
nation.
Immediate Transmission is useful if
you want immediate confirmation
that the message is being sent to the
correct destination (just check the oth-
er terminal's Own Name or Own Fax
Number on the control panel during
transmission).
Limitation
❒ Internet Fax is performed only
with Mem ory Transm issio n -
which starts transmission auto-
matically after storing documents
in memory. If you specify Immedi-
ate Transmission in Internet Fax,
the “Try again after switching
to memory transmission.
which starts transmission auto-
matically after storing documents
in memory. If you specify Immedi-
ate Transmission in Internet Fax,
the “Try again after switching
to memory transmission.
” mes-
sage appears. When this happens,
press [Exit], and then switch to
Memory Transmission.
press [Exit], and then switch to
Memory Transmission.
Note
❒ You cannot send the same docu-
ment to multiple destinations
(broadcasting). Memory Transmis-
sion allows this function.
(broadcasting). Memory Transmis-
sion allows this function.
❒ You can have the machine set to
Memory Transmission mode or
Immediate Transmission mode
right after the power is turned on.
See p.81 “Home Position”, Facsimi-
le Reference <Advanced Features> .
Immediate Transmission mode
right after the power is turned on.
See p.81 “Home Position”, Facsimi-
le Reference <Advanced Features> .
❒ You can have the machine return
to the default transmission mode
(Memory Transmission or Imme-
diate Transmission) after every
transmission. You can change this
so that the desired setting is main-
tained. See p.66 “General Set-
tings/Adjust”, Facsimile Reference
<Advanced Features> .
(Memory Transmission or Imme-
diate Transmission) after every
transmission. You can change this
so that the desired setting is main-
tained. See p.66 “General Set-
tings/Adjust”, Facsimile Reference
<Advanced Features> .
AAAA
Make sure the Memory Trans. in-
dicator is off.
dicator is off.
Note
❒ If it is not, press the {{{{Memory
Trans.
}}}} key.
BBBB
Place the original.
Note
❒ You can scan a few pages of
your original from the exposure
glass and the remaining pages
from the ADF. When you have
finished scanning from the ex-
posure glass, remove the origi-
nal from the exposure glass and
place the remaining pages in the
ADF within 10 seconds.
glass and the remaining pages
from the ADF. When you have
finished scanning from the ex-
posure glass, remove the origi-
nal from the exposure glass and
place the remaining pages in the
ADF within 10 seconds.
❒ To send two or more pages us-
ing the exposure glass, set them
one page at a time.
one page at a time.
❒ The original can be placed when-
ever, before the
{{{{Start}}}} key is
pressed.
ABZ003S
StellaC2-GBcombine-F_FM_ZF.book Page 19 Wednesday, November 26, 2003 5:04 PM