Digicom COMSPHERE 3911 User Manual

September 1998

3910-A2-GN32-40

If you want to disable the modem’s data stream, press the F2 key. When the message Command
Complete appears, press the  

  key to clear the message.

F1

Data Stream
Port1 Enable

F2

F3

Press the F2 key again to enable the modem’s data stream.

To exit this function and remain in the Control branch, press the  

  key. To exit and return to

the Top-Level menu, press the  

  key.

Use the EIA LEDs function to change the port that controls the front panel LEDs. This function
allows the front panel EIA LEDs to display the activity of a selected digital interface.

To access EIA LEDs from the Control branch, make the following selections:

F1

Control:
EIA_LEDs

F2

F3

Press the  

  key until EIA_LEDs appears. Select EIA_LEDs.

F1

EIA_LED : xxxxx
Port1

CC

F2

F3

Press the F1 key until the appropriate digital interface appears.

The xxxxx field displays the currently selected interface. The valid interfaces are Port1, and
depending on the configuration option, either CC (NMS Control Channel), or DC (Diagnostic
Channel). Refer to Diag Connection in Table 5-8, Miscellaneous Configuration Options, in
Chapter 5, DCP Configuration.

Select the appropriate interface by pressing the corresponding function key.

F1

EIA_LED : xxxxx
Command Complete

F2

F3