Digicom COMSPHERE 3911 User Manual
Sample Configurations
G-5
3910-A2-GN32-40
September 1998
Point-to-Point with Network Management
Figure G-4 shows a sample configuration for point-to-point applications with network
management.
management.
NMS
(6700
or
6800)
Adapter
(002-0025-0031)
CC
IN
3600-
F3-
300
Hubbing
Device
Device
Cable 4
3910
A
Cable 1
Cable 1
Cable 2
Cable 2
Leased
19200(V32t)
19200(V32t)
TX
TX
DTE
(Sync)
DTE
(Sync)
3910
B
NMS
Figure G-4. Sample Configuration — Point-to-Point with Network Management
Configuration Options
3910 A
Use Sync Leased (Answer) default configuration options.
3910 B
Use Sync Leased (Originate) default configuration options.
Cables
Cable 1
Use a standard, customer-supplied, EIA-232-D/V.24 cable with a DB-25-P (plug)
connector at one end to attach to the modem. Attach this to the connector labeled
DTE1.
connector at one end to attach to the modem. Attach this to the connector labeled
DTE1.
Cable 2
Use part number 125-0053-1431 (an 8-position, 8-wire modular cord that is
supplied with the modem). Attach this to the connector labeled LEASED.
supplied with the modem). Attach this to the connector labeled LEASED.
Cable 4
Use part number 835-1224-1011 (10 feet), part number 125-0040-0031 (12 feet),
part number 835-1224-2511 (25 feet), part number 835-1224-5011 (50 feet), or an
equivalent pin-to-pin 6-position, 6-wire modular cord. The maximum cable length
is 50 feet.
part number 835-1224-2511 (25 feet), part number 835-1224-5011 (50 feet), or an
equivalent pin-to-pin 6-position, 6-wire modular cord. The maximum cable length
is 50 feet.