Digicom COMSPHERE 3911 User Manual

September 1998

3910-A2-GN32-40

To access Backup from the Status branch, make the following selection:

Press the  

  key until Backup appears.

F1

Status:
DTE

Backup

F2

F3

Select Backup.

F1

Status:Backup

>

Line=Pri 4w APL

F2

F3

The configuration of the current operating line facility (either APL primary or backup) appears
(Refer to Table 4-2).

Press the  

  key to display the next screen.

F1

Status:Backup

<

Bkup:2wAPL=Good

F2

F3

This screen displays the configuration and condition of the inactive line facility (either APL
primary or backup).

There are four condition codes, Good, Bad, ????, and ‘    ’ (blank).

Table 4-2 provides information about the Status Backup screens. The first column lists all
possible configurations for the modem’s currently active line. The second column lists all
possible configurations for the modem’s inactive lines. The third column provides information
about the inactive line condition.

XXXX represents the condition code of the inactive line.