Digicom 8D5499 User Manual

 

 

 

 

Pag. 3

                                                                                                                                
 

All rights reserved; no part of this publication may be reproduced, stored in a retrieval system, 

or trasmitted in any form or by any means, electronic, otherwise, without the prior written 

permission of Digicom S.p.A. The contents of this booklet may be modified without notice. 

Every possible care has been taken in testing and putting together all the documentation 

contained in this booklet, however Digicom can not take any responsability brought by the use 

of this booklet. 

 

The following installation rules should be respected in order to have the best working order of 

the equipment and for the user’s safety. 

 

ENVIROMENTAL TEMPERATURE 

 from 0 to 

45°C 

RELATIVE HUMIDITY

 from 20 to 80% n.c. 

 

Rapid changes of temperature or humidity should be avoided (0,03°C/min). 

This equipment, including cables, should be installed in an area free from: 
•  Dust, humidity, heat from direct sun light. 

•  Objects which irradiate heat. These could cause damage to the container or other 

problems. 

•  Objects which produce a strong electtromagnetic field (loudspeakers, etc.) 

•  Liquids or chemical corrosive substances. 

 

Use a clean and soft cloth. Wet the cloth with water or natural detergent if it is necessary to 

remove any stains. Never use chemical products such as petrol or solvents. 

 

Caution against vibrations and dropping. 

 

This product satisfies the basic requirements of the below indicated Directive: 
• 

 

•  EN 55022  

•  EN 61000-3-2 

•  EN 55024 

•  EN 60950 

•  EN 41003