Digi Tech DigiTech Telephone C0408 User Manual

 Of System Features

off hook. Prime line pickup may be pre-empted by
preselecting another line before lifting the handset. 
the prime line is ringing, 

 is automatically answered by

lifting the handset. Prime line automatic is assigned 
a station through station class of service programming.

Stations can be programmed to provide a privacy
button. If a line is private, a user can press the privacy
button to change it into a non-private one. If the line is
non-private, pressing the button will have no effect.

Station class of service programming is used to
program the programmable button function at the
stations.

See the discussion titled:  Privacy   Designated

See the discussion titled:  Access Denied.

A station user can store one-button, direct station

selection (DSS) at any memory button location to

create a DSS memory button. When this button is

pressed, any active outside call is automatically placed
on hold and an intercom call is automatically made to
that previously stored station number. The visual

indicators of the stations programmed at the button
locations form a busy lamp field 

 The BLF

conveys station status to the user. An 

 number

can also be programmed as a secondary function at
every 

 memory location. No class of 

is required. 

 refer to the discussion titled:  Tone 

Refer to the discussions titled: 
Programmability 

The system can be programmed on a per line basis 

allow the stations to switch from pulse to DTMF type
dialing as needed. Aftemately, the system can be
programmed to only allow tone dialing. The line class
of service programming sets the dialing mode required
for a particular line.

This feature allows a user to reply in a non-verbal

manner to a voice announce or tone-signalled
intercom call or to a secure off -hook voice announce
call if the intercom caller is using an LCD
speakerphone. A station user can press a
programmable button in response to an intercom call

and 

send a message to be shown on the display of the

calling station. Response messages are
pre-programmed by the attendant and later stored by
station users at programmable buttons on their
individual stations as need dictates.

Both remote class of service programming and the

transmission of SMDR data for printing are available
through serial data ports. The system supports X-on

X-off terminal control codes as well as a DTR signal for
handshaking. The system data communications
operates per the popular XMODEM protocol. The
database can be uploaded or downloaded, error free,

from or to a remote computer that is running software
that supports the XMODEM protocol. The two serial

data ports allow VDT programming (either local or

remote) to be conducted through one port at the same

time that the other port is being used to send SMDR
data for printing. VDT programming of the system is

menu driven.

The system can be programmed on a per station basis
to provide ringing line preference on all lines

programmed for ringing at the station.

When ringing line preference is enabled at a station,
taking the handset off-hook automatically connects the
station to any outside line that is ringing at it. A line
button will not have to be pressed. 

 a station also  has

prime  line assigned, the prime line will 

 be

answered first even though it may be the second line

to ring. The 

 of a particular station to  answer  a

ringing line without line selection is enabled by the
station class of service programming.

This feature enables a button action to save the first 16
digits of the last number manually dialed from the

buttonpad. The saved number can be redialed at a
later time. The saved number is permanently available

for later use until it is replaced with a new number.

  the secure off-hook voice announce  (SOHVA)

feature, a  secure announcement  can be made from
one station to another station that is off-hook and busy