Digi Tech DigiTech Telephone C0408 User Manual

 66-083

Arrange both station-to-trunk and station-to-station
data communications through the system stations,
using a data device, a modem, and a data switch.

Any data device (such as a VDT or a personal
computer equipped with communications 

Any Hayes-compatible modem

A data switch (such as the model PC-787JJ from

Refer to Figure 3-l 7, and connect the equipment as
illustrated. Certain digital telephone models include a
headset jack located on the rear housing near the line

jack. This headset jack marking reads 

Installing this telephone requires the following

connection changes:

The telephone handset remains connected to the
telephone and left on-hook.

Connect the accessory headset to the handset jack
of the data switch.

Connect the telephone jack of the data switch to the
headset jack of the telephone. Do not connect it to

the the handset jack as illustrated. Make this

connection with the modular cable supplied with the
data switch. Make the modem and data device
connections using cabling specified in the literature
accompanying this equipment.

The data switch has a compatibility control located on
the bottom of the cabinet. Set this control to match
the telephone equipment being used.Change the

settings 

 2 positions from the specified settings to

provide the quietest data path possible.

Use a flat blade screw driver to set the compatibility

control as follows:

l 

With the telephone handset connected to the data

switch as illustrated, set the compatibility control to

l 

With the accessory headset connected to the data

switch, set the compatibility control to 

 9.

The data switch has a phase switch located on the

right side of the cabinet.

l 

Set this switch to the NORMAL position (toward the

rear of the cabinet).

It is very important to set the telephone volume
control to the minimum level.

STATION-TO-TRUNK

To make a data transmission to a distant site over a

 line,

1. Set data switch to VOICE.

2. Prepare modem and data device for data

communications. Refer to information supplied
with software and equipment.

3 . Press telephone line button and hear dial tone.

4. Set data switch to DATA.

5. Issue dialing command to modem from data device

keyboard.

STATION-TO-STATION

To make a data transmission to another station

equipped and connected as shown in Figure 

,

1.

2 .

3 .

4 .

5 .

6.

7 .

Set data switch to VOICE.

Prepare modem and data device for data

communications. Refer to information supplied

with software and equipment.

Press 

 on telephone and hear dial tone.

Dial other station and set up voice call.

Type 

 D on data device keyboard but do not

press ENTER. Ask intercom party to type 

 on

their data device keyboard but do not press

ENTER.

Complete voice conversation, ask intercom party to

set their data switch to DATA and to press ENTER
on their keyboard.

Set data switch to DATA, and press ENTER on

data device keyboard. Modems will automatically

complete data connection.