Digi Tech DigiTech Telephone C0408 User Manual
STATION CONFIGURATION
lark the desired selections in the charts to record programming needs. (Make copies of the pages to provide additional records if needed.
Mditional records may be needed when add-on expansion modules are employed to extend the station capacity of a base unit.)
Mditional records may be needed when add-on expansion modules are employed to extend the station capacity of a base unit.)
Dial the feature
and then dial the selection code or press the
button to program the selection.
A current
provided
setting is indicated
a lighted LED next to the programming button for that selection.
When a
action is
y a sing/e button, the lighted LED indicates an active feature. When programming without
a
console, repeat
the procedure to disable
a
at a keypad selected station.
Station port selection is made by dialing a selection number on the keypad per the following reference chart.
S T A
KEYPAD BUTTONS
1 0 - 5 7
FEATURE DESCRIPTION
ENTRY CODE AND PROMPTING DISPLAY
REFERENCE RECORD
Base Level: The first step In any
programming sequence is to
programming sequence is to
the
base level. Once in this mode, any
desired configuration can be set.
Press
Dial 7 4 6
Statlon Default: The station
1. Dial
“STATION DEFAULT
configuration features, described in the
2. Dial
to
station ports system-wide.
following procedures, can be defaulted to
a standard
a standard
Of
These
will provide satisfactory system
Station
57: Dial 10 57.
performance in a broad range of site
4. Dial
for additional stations to default.
applications.
Dial
for configuration mode.