Dexlan IP POWER 068420 User Manual

IP POWER 9258 USER MANUAL 

 

 

Before you star to use IP Power 9258, please follow the steps below 

  Check the package to make sure the contents is complete. 
  Prepare one Ethernet HUB or Router 
  Check the voltage of the power supply to make sure it is AC 110-240 volt 
  Please confirm the specification of your power cable.  

 IP Power 9258S : for 220-250V, please use the 10A power cable.  
 IP Power 9258T : for 100-120V, please use the 15A power cable.     

        

1 

Connect the 9258 to HUB through network wire.  

2 

Connect the HUB or Router to the internet (may through ADSL/XDSL modem). 

3 

Connect the power adapter to the 9258. 

4 

Connect the power adapters of under control electric equipment to corresponding 

out port of 9258. 

 

 

Turn on your computer and the power adapter of IP Power 9258 

 ＊  for 220-250V, please use power wire can support 10A current..     

Max. output current: (total) 10A  ,  (individual) 6A. 

 

  •  for 100-120V, please use power wire can support 15A current..     

Max. output current: (total) 15A ,   (individual) 6A  
 

Having connected the power supply and network wire with RJ45 port to the 9258, please 
install the software by following the steps below:

1.  Start your computer, put the installation disc in the CDROM, then find the file 

named ipeditv3.exe in the installation disc. 

2.  Copy the file to your desktop or any directory you want it saved to. 
3.  Start the initial setting process following the construction in next section.