Cirkuit Planet MH-1000 User Manual

Multi-Homing Security Gateway User’s Manual 

This section deals with issues regarding your MH-1000’s basic functions. 

If the Power and other LEDs fail to light when your MH-1000 is turned on: 

- Make sure that the power cord is properly connected to your firewall and that the power supply adapter is 

properly connected to a functioning power outlet. 

- Check that you are using the 12VDC power adapter supplied by Planet for this product. 

 

If the error persists, you may have a hardware problem, and should contact technical support. 

 

When your MH-1000 is turned on, the LEDs turn on for about 10 seconds and then turn off. If all the LEDs 

stay on, there may be a hardware problem. 

 

If all LEDs are still on one minute after powering up: 

- Cycle the power to see if the router recovers. 

- Clear the configuration to factory defaults. 

 

If the error persists, you may have a hardware problem, and should contact technical support. 

 

If either the LAN LEDs or Internet LED does not light when the Ethernet connection is made, check the 

following: 

- Make sure each Ethernet cable connection is secure at the firewall and at the hub or workstation. 

- Make sure that power is turned on to the connected hub or workstation. 

- Be sure you are using the correct cable. When connecting the firewall’s Internet port to a cable or DSL 

modem, use the cable that was supplied with the cable or DSL modem. This cable could be a standard 

straight-through Ethernet cable or an Ethernet crossover cable. 

 

Try entering the default User Name and Password: 

User Name: admin 

Password: admin 

 

 

 

 

- 82 -