Cirkuit Planet MH-1000 User Manual

Multi-Homing Security Gateway User’s Manual 

3. Under Microsoft VM*, make sure that a safety level for Java permissions is selected. 

4. Click OK to close the dialogue. 

 

 If Java from Sun Microsystems is installed, scroll down to Java (Sun) and ensure that the checkbox 

is filled. 

If you are having problems with the WAN Interface, refer to the tips below. 

If the WAN IP address cannot be obtained from the ISP: 

- If you are using PPPoE or PPTP encapsulation, you will need a user name and password. Ensure that 

you have entered the correct Service Type,  User Name, and Password. Note that user names and 

passwords are case-sensitive. 

- If your ISP requires MAC address authentication, clone the MAC address from your PC on the LAN as 

MH-1000’s WAN MAC address. 

- If your ISP requires host name authentication, configure your PC’s name as MH-1000’s system name. 

 

Unless you have been assigned a static IP address by your ISP, your MH-1000 will need to request an IP 

address from the ISP in order to access the Internet. If your MH-1000 is unable to access the Internet, first 

determine if your router is able to obtain a WAN IP address from the ISP. 

 

To check the WAN IP address: 

1. Open your browser and choose an external site (i.e. 

www.planet.com.tw

). 

2. Access the Web Configuration Interface by entering your router’s IP address (default is 192.168.1.1). 

3. The WAN IP Status is displayed on the first page. 

 

 

 

 

 

- 87 -