Desa SL-5326 User Manual

Page of 8
Models 5312 & 5318
Motion Sensor Light 
Control with 2-Level 
Lighting
© 2007 DESA Specialty Products™ 
598-1274-00
TEST
2 Shells*
Features
•  Turns on lighting when motion is detected.
•  Automatically turns lighting off.
• 2-Level Lighting Timer.
•  Photocell keeps the lighting off during daylight hours.
•  LED indicates motion was sensed (day or night).
TEST  1 5 20
ON-TIME
Off 3 6 Dusk to
    Dawn
2-Level Lighting
Put ON-TIME switch on 
the sensor bottom to 
TEST and the 2-Level 
Lighting switch OFF.
2-LEVEL LIGHTING TIMER
Light comes on half bright for selected time after dusk 
(Off, 3 hr., 6 hr., until dawn).  If motion is sensed, 
the light turns on full bright for the ON-TIME (1, 5, 
or 20 minutes) then returns to dim mode.
* Model SL-5318 only
®
Mode: On-Time: 
Works: 
Day 
Night
Test 5 
Sec 
 x 
x
Auto 
1, 5, 20 min. 
 
 
x
Manual Until 
Dawn* 
 
  x
OPERATION
* resets to Auto Mode at dawn.
MANUAL MODE
ON-TIME
TEST  1 5 20
... back on.
AUTO
1 Second OFF 
then...
Put the ON-TIME switch in the 1, 5, 
or 20 minute position.
Manual mode only works at night 
because daylight returns the sensor 
to AUTO.
Flip the light switch off for one second 
then back on to toggle between AUTO 
and MANUAL MODE.
Manual mode works only with the 
ON-TIME switch in the 1, 5, or 20 
position.
Move ON-TIME Switch to 
1, 5, or 20 minutes
Mode Switching Summary
Flip light switch off 
for one second then 
back on*
MANUAL MODE
AUTO
TEST
*  If you get confused while switching modes, turn the 
power off for one minute, then back on. After the cali-
bration time the control will be in the AUTO mode.
Note:   When fi rst turned on wait about 1 
1
/
2
 minutes for 
the circuitry to calibrate.
This package includes:
Light Control
Sensor
Cover 
Plate
Lamp 
Holders
Plastic Hanger
Rubber Plug
Gasket
6 Screws
(3 sizes included)
Mounting Strap
Mounting Bolt
2 Wire
Connectors
Requirements
•  The Light Control requires 120-volts AC.
•  If you want to use Manual Mode, the control must be 
wired through a switch.
•  S o m e   c o d e s   r e q u i r e   i n s t a l l a t i o n   by   a 
qualifi ed electrician.
•  This product is intended for use with the enclosed 
gasket and with a junction box marked for use in wet 
locations.