Denso BHT-7500 User Manual
106
BHT-7500W
INITIALIZE RF
Initialize Parameters?
1:Yes
1:Yes
2:No
Selecting the "4:INITIALIZE" on the RF parameter
menu calls up the screen shown at left.
menu calls up the screen shown at left.
To initialize the RF parameters, choose "1:Yes" and
press the ENT key. Initialization will start with the
"** Initializing **" displayed. After completion of
initialization, the screen returns to the RF param-
eter menu.
press the ENT key. Initialization will start with the
"** Initializing **" displayed. After completion of
initialization, the screen returns to the RF param-
eter menu.
To cancel initialization, choose "2:No" and press
the ENT key. The screen will return to the RF
parameter menu.
the ENT key. The screen will return to the RF
parameter menu.
When the "** Initializing **" is displayed,
the initialized data will be written onto the
EEPROM of the wireless module built in the
BHT-7500W.
the initialized data will be written onto the
EEPROM of the wireless module built in the
BHT-7500W.
While this message is displayed, do not turn
the BHT off. Writing halfway onto the
EEPROM will not bring any assured settings.
the BHT off. Writing halfway onto the
EEPROM will not bring any assured settings.
Initialization will not initialize WEP keys.
[8.1.4]
RF parameter initialization screen