Denso BHT-7500 User Manual

150

■ Problem

An error has occurred during execution of System
Program.

If this error occurs, the BHT beeps five times
(for 0.1 second per beep).

■ Solution

Unload and reload the battery cartridge, then turn
on the power.

If this error occurs frequently, make a note of the
message and codes on the LCD and contact your
nearest dealer.

■ Problem

Any of the following errors has occurred:

(1) Hardware error

Calendar clock error:

(1010)

Flash memory error:

(1020)

(2) Memory storage error

(2XXX)

(3) Execution program error

(3010)

(4) RF system error

(4110)

(XXXX: Error code)

If any of the above errors occurs, the BHT
beeps five times (for 0.1 second per beep)
and then turns itself off.

■ Solution

Turn on the power again.

If error (1) or (4) above occurs frequently, contact
your nearest dealer.

If error (2) occurs frequently, initialize the BHT
System (the whole user area including the font file
area).

If error (3) occurs frequently, delete the execution
program file that causes this error or download
the original execution program file to overwrite
the current one.

 System down error!

type:XXXXXXXX R0 :XXXXXXXX
ercd:XXXXXXXX R1 :XXXXXXXX
inf1:XXXXXXXX R2 :XXXXXXXX
inf2:XXXXXXXX R3 :XXXXXXXX
              R4 :XXXXXXXX
SR  :XXXXXXXX R5 :XXXXXXXX
PC  :XXXXXXXX R6 :XXXXXXXX
PR  :XXXXXXXX R7 :XXXXXXXX
              R8 :XXXXXXXX
              R9 :XXXXXXXX
              R10:XXXXXXXX
              R11:XXXXXXXX
              R12:XXXXXXXX
              R13:XXXXXXXX
              R14:XXXXXXXX
              R15:XXXXXXXX

Contact your

    administrator.

Note the error

           number.

(XXXX)