Denso BHT-7000 User Manual
64
[5.2]
Memory test
Selecting "2:MEMORY" on the TEST menu calls up
the screen shown at left, and then starts writing
and reading onto/from all areas of the RAM as well
as checking the address.
the screen shown at left, and then starts writing
and reading onto/from all areas of the RAM as well
as checking the address.
XXXXX: Tested RAM capacity (unit: kilobytes)
YYYYY:
Total RAM capacity (unit: kilobytes)
Upon normal completion of the RAM test, the BHT-
7000 beeps once, shows the message as shown at
left, and returns to the TEST menu.
7000 beeps once, shows the message as shown at
left, and returns to the TEST menu.
If any error is detected, the BHT-7000 beeps three
times, shows the message as shown at left, and
terminates the test.
times, shows the message as shown at left, and
terminates the test.
Where,
ZZZZZZZZ:
Address where an error has occurred.
AAAAAAAA: Data to write.
BBBBBBBB: Data read out from the RAM.
To return to the TEST menu, press the C key.
TEST MEMORY
** Testing **
XXXXX/YYYYY
XXXXX/YYYYY
TEST MEMORY
** Test NG **
XXXXX/YYYYY
XXXXX/YYYYY
Address : ZZZZZZZZ
Write : AAAAAAAA
Read : BBBBBBBB
Write : AAAAAAAA
Read : BBBBBBBB
TEST MEMORY
** Test OK **
YYYYY/YYYYY
YYYYY/YYYYY