Denso BHT-100Q User Manual

14

■  Ir-Transfer Utility C (option)

Running on the host computer, this utility transfers files between the BHT and the host
computer.  For its file transfer control procedure, the utility uses the BHT-Ir protocol.
(For the details about the BHT-Ir protocol, refer to Chapter 3, Subsection 3.4.2.)

To transfer files under any of the following conditions, use Ir-Transfer Utility C:

-

At transmission speeds of 115200 or 57600 bps (This may be impossible de-
pending upon the host computer type.)

-

When the BHT is placed on the CU-7000

-

Via the direct-connect interface of the BHT

■  Ir-Transfer Utility E (option)

Running on the host computer, this utility transfers files between the BHT and the host
computer.  For its file transfer control procedure, the utility uses the BHT-Ir protocol.
(For the details about the BHT-Ir protocol, refer to Chapter 3, Subsection 3.4.2.)

To transfer files under any of the following conditions, use Ir-Transfer Utility E:

-

Via an external IR transceiver

-

Via an IR port integrated in a computer

■  Transfer Utility (option)

Running on the host computer, this utility transfers files between the BHT and the host
computer.  For its file transfer control procedure, the utility uses the BHT-protocol.
(For the details about the BHT-protocol, refer to Chapter 3, Subsection 3.4.1.)

To transfer files under any of the following conditions, use Transfer Utility:

-

When the BHT is placed on the CU-7000

-

Via the direct-connect interface of the BHT