Denso BHT-100Q User Manual

25

Chapter 2.  Getting Started the BHT and System Mode

You can adjust the LCD brightness to eight contrast levels.

(1) Use the 1 key (or M1 or M2 key) to select the LCD CONTRAST line.

(2) To decrease the contrast, press the M1 key with the SF key held down; to increase

it, press the M2 key with the SF key held down.

You may choose any of three ways—beeping only, vibrating only, or beeping & vibrat-
ing as a confirmation of completion of code reading.

(1) Use the 2 key (or M1 or M2 key) to select the BEEPER VIBRATION line that will be

highlighted in any one of the following three states:

(2) Highlight the desired way(s) by using the M1 or M2 key while holding down the SF

key.

You can adjust the beeper volume to four levels from OFF to MAX.

(1) Use the 3 key (or M1 or M2 key) to select the BEEPER VOLUME line.

(2) To turn down the volume, press the M1 key with the SF key held down; to turn it

up, press the M2 key with the SF key held down.

You can adjust the volume of the beeper to be sounded when you press the touch
screen, to three levels from OFF to MAX.

(1) Use the 4 key (or M1 or M2 key) to select the VOLUME line.

(2) To turn down the volume, press the M1 key with the SF key held down; to turn it

up, press the M2 key with the SF key held down.

SF + M2

SF + M2

SF + M1

SF + M1