Denon DN-780R User Manual
10
ENGLISH
2
AUTO-STANDBY
This function is extremely convenient when conducting
relay recording, relay playback, twin recording or tape
copying.
• When the Fast Rewind ( 6 ) and Rec Pause ( 3 )
relay recording, relay playback, twin recording or tape
copying.
• When the Fast Rewind ( 6 ) and Rec Pause ( 3 )
buttons are pressed simultaneously while in the
stop mode and the tape is set to play in the forward
direction ( 1 ), the tape is rewound to the
beginning, then played to the end of the leader
tape and stopped automatically at the beginning of
the magnetic tape.
stop mode and the tape is set to play in the forward
direction ( 1 ), the tape is rewound to the
beginning, then played to the end of the leader
tape and stopped automatically at the beginning of
the magnetic tape.
• When the Fast Forward ( 7 ) and Rec Pause ( 3 )
buttons are pressed simultaneously while in the
stop mode and the tape is set to play in the reverse
direction ( 0 ), the tape is fast-forwarded to the
end, then played in the reverse direction to the end
of the leader tape and stopped automatically at the
beginning of the magnetic tape.
stop mode and the tape is set to play in the reverse
direction ( 0 ), the tape is fast-forwarded to the
end, then played in the reverse direction to the end
of the leader tape and stopped automatically at the
beginning of the magnetic tape.
• The Play ( 0 or 1 ) indicator flashes during the
auto-standby mode.
Caution :
If recording is started after using the auto standby
function with a recorded tape, the sound of the
previous recording may not be completely erased.
In such cases, rewind the tape before starting to
record.
function with a recorded tape, the sound of the
previous recording may not be completely erased.
In such cases, rewind the tape before starting to
record.
2
TWIN RECORDING (simultaneous recording on
deck A and deck B)
deck A and deck B)
This is a convenient feature for recording the same
program source onto two tapes at the same time.
• This function records the source input to the DECK
program source onto two tapes at the same time.
• This function records the source input to the DECK
A LINE IN jacks.
• Input the source you want to record to the DECK A
LINE IN jacks.
• Load cassette tapes into both deck A and B. Set
the DOLBY NR switch (Deck A only) and REV.
MODE button.
MODE button.
• In the twin recording mode, only the recording
monitor signal of the DECK A LINE OUT jacks is
output.
output.
q Press the TWIN REC button
@1. The
indicator will light up and both decks will enter the
recording pause mode.
recording pause mode.
w Adjust the INPUT LEVEL-A control
y for the best
recording input levels while watching the Peak
Level Meter.
Level Meter.
e Press the Play ( 0 or 1 ) button
!4 (deck A or B)
to start twin recording.
r To stop twin recording, press the Stop ( 2 ) button
!4 of each deck.
• By pressing the both deck A and B Rec Pause ( 3 )
button
!4, the recording pause or recording mute
mode on both decks can be set automatically.
• To set the twin recording mute mode from the twin
recording pause mode, press the Rec/Rec Mute
(4) button on both deck A and B for at least 0.5
seconds.
(4) button on both deck A and B for at least 0.5
seconds.
• The relay or cascade mode cannot be set with the
REV. MODE button when in the twin recording
mode.
mode.
2
RELAY RECORDING (continues recording from
deck A to deck B)
deck A to deck B)
To record a long program, start recording on deck A,
and when both sides of the tape in deck A have been
recorded, the relay recording feature continues to
record on the tape in deck B.
• This function records the source input to the DECK
and when both sides of the tape in deck A have been
recorded, the relay recording feature continues to
record on the tape in deck B.
• This function records the source input to the DECK
A LINE IN jacks.
• Load cassette tapes into decks A and B, and set
the DOLBY NR switch both deck A/B.
q REV. MODE button
@0 set to “RELAY”.
The RELAY indicator will light.
Recording Order
Deck A
Side facing you
/ Opposite side
/ Opposite side
Side facing you
/ Opposite side
/ Opposite side
Deck B
w Adjust the INPUT LEVEL control
y of both deck A
and B for the best recording input level while
watching the Peak Level Meter.
watching the Peak Level Meter.
e Press the Rec/Rec Mute ( 4 ) button
!4 of deck A
to set the recording pause mode.
r Press the Play ( 0 or 1 ) button
!4 of deck A to
start relay recording.
t To stop relay recording, press the Stop ( 2 ) button
!4 of the deck that is recording.
If recording has been switched from Deck A to
Deck B, be sure to start recording in the forward
direction (1).
If recording has been switched from Deck A to
Deck B, be sure to start recording in the forward
direction (1).
NOTE :
In the relay recording mode, it is not possible to
perform the recording operations simultaneously on
Decks A and B. Nothing happens if the recording
operation is performed on one of the decks while
the other deck is already in the recording mode.
perform the recording operations simultaneously on
Decks A and B. Nothing happens if the recording
operation is performed on one of the decks while
the other deck is already in the recording mode.
2
SYNCHRONIZED OPERATION
• The synchro function can be used when the DN-
780R is used together with a Denon product
equipped with an EXT. SYNC. IN/OUT jack.
equipped with an EXT. SYNC. IN/OUT jack.
• Twin recording in sync with another DN-780R is
possible.
• Use a single RCA cable to connect the units’ EXT.
SYNC. OUT jacks with the units’ EXT. SYNC. IN
jacks.
jacks.
q Press the TWIN REC button
@1 on one of the
units.
The twin recording command is output from the
EXT. SYNC. OUT jack and the other unit is set to
the twin recording mode.
The twin recording command is output from the
EXT. SYNC. OUT jack and the other unit is set to
the twin recording mode.
w Press the Play ( 0 or 1 ) button
!4 on one of the
units.
The play command is output from the EXT. SYNC.
OUT jack and twin recording also starts on the
other unit.
The play command is output from the EXT. SYNC.
OUT jack and twin recording also starts on the
other unit.
e Press the Stop ( 2 ) button
!4 on one of the units.
The stop command is output from the EXT. SYNC.
OUT jack and the other unit is also set to the stop
mode.
OUT jack and the other unit is also set to the stop
mode.