Delta Tau GEO BRICK LV User Manual
Geo Brick LV User Manual
Troubleshooting
254
Boot Switch SW (Firmware Reload)
– Write-Protect Disable
This momentary button switch has two essential functions:
1. Putting the Geo Brick LV in Boostrap Mode for reloading PMAC firmware.
2. Disabling the USB/Ethernet communication write-protection for
2. Disabling the USB/Ethernet communication write-protection for
Changing IP address, Gateway IP or MASK
Enabling ModBus
Reloading communication boot and firmware
These functions are accessible through the Configure Ethernet 100 BaseT utility found in the
Windows Start menu under PMAC Executive Pro2 Suite > Delta Tau Common > Configure
Ethernet 100 BaseT:
Windows Start menu under PMAC Executive Pro2 Suite > Delta Tau Common > Configure
Ethernet 100 BaseT:
Note
This utility only works with USB communication.
The Pewin32Pro2 or any other software communicating to the
Brick must be closed before launching this utility.
Brick must be closed before launching this utility.