DELL N4000 Series Technical Manual
9
SCG1001
Dell Networking N4000 Series and Dell PowerConnect 8100 Series Configuration Guide
Would you like to run the setup wizard (you must answer this question within 60
seconds)? [Y/N] N
seconds)? [Y/N] N
2.3
Disable DCB
Note: If you plan to configure DCB (using Section 3) skip this section. For non-DCB environments, DCB
must be manually disabled using the following steps:
must be manually disabled using the following steps:
console>enable
console#configure
console(config)#no dcb enable
console(config)#
exit
2.4
Configure out of band (OOB) management port
console>enable
console>#configure
console(config)#interface out-of-band
console(config-if)#ip address ipaddress mask gateway
console(config-if)#exit
2.5
Http and Telnet authentication
console>enable
console#config
console(config)#line telnet
console(config-telnet)#login authentication default
console(config-telnet)#exit
console(config)#ip http authentication local
2.6
Configure login credentials
console(config)#username admin password yourpassword privilege 15
console(config)#enable password yourpassword