DeLonghi PrimaDonna Exclusive ESAM 6900.M Instruction Manual
23
DISPLAYED MESSAGES
DISPLAYED MESSAGE
POSSIBLE CAUSE
SOLUTION
FILL WATER TANK
Insufficient water in tank or tank not inserted correctly
Fill the tank with water and/or insert it correctly, pushing it
as far as it will go until it clicks into place.
as far as it will go until it clicks into place.
GROUND TOO FINE ADJUST
MILL
MILL
The grinding is too fine and the coffee is delivered too slowly
or not at all.
or not at all.
Repeat coffee delivery and turn the grinding adjustment
dial one click clockwise towards “7” while the coffee mill is
in operation.
If after making at least 2 coffees delivery is still too slow,
repeat the correction procedure, turning the grinding
adjustment dial another click until delivery is correct.
If the problem persists, press OK to deliver water from the
spout until it flows out normally.
dial one click clockwise towards “7” while the coffee mill is
in operation.
If after making at least 2 coffees delivery is still too slow,
repeat the correction procedure, turning the grinding
adjustment dial another click until delivery is correct.
If the problem persists, press OK to deliver water from the
spout until it flows out normally.
INSERT WATER SPOUT
The water spout is not inserted or is inserted incorrectly.
Insert water spout as far as it will go.
EMPTY GROUNDS CONTAINER
The grounds container is too full or more than 3 days have
passed since delivery of the first coffee (this guarantees
correct hygiene of the machine).
passed since delivery of the first coffee (this guarantees
correct hygiene of the machine).
Empty the grounds container and clean, then replace.
Important: when removing the drip tray, the grounds
container MUST be emptied, even if it contains few
grounds.
If this is not done, when you make the next coffees, the
grounds container may fill up more than expected and clog
the machine.
Important: when removing the drip tray, the grounds
container MUST be emptied, even if it contains few
grounds.
If this is not done, when you make the next coffees, the
grounds container may fill up more than expected and clog
the machine.
INSERT GROUNDS CONTAINER
After cleaning, the grounds container has not been
replaced.
replaced.
Open the service door, remove the drip tray and insert the
grounds container.
grounds container.
ADD PRE-GROUND COFFEE
The “pre-ground coffee” function has been selected
without placing any pre-ground coffee in the funnel.
without placing any pre-ground coffee in the funnel.
Place pre-ground coffee in the funnel or deselect the
“pre-ground” function.
“pre-ground” function.
The funnel (A8) is blocked.
Empty the funnel with the help of the cleaning brush as
described in the section “Cleaning the pre-ground coffee
funnel”.
Descale
The machine must be descaled.
The descaling procedure described in the “Descaling”
section needs to be performed as soon as possible.
Replace water filter
The water filter is exhausted.
Replace the filter or remove it as described in the section
“Water filter”.
“Water filter”.