DeLonghi PrimaDonna Exclusive ESAM 6900.M Instruction Manual
10
B15.
icon: to select the coffee quantity.
Please note :
A light touch is enough to activate the icon.
Description of milk container
(page 2 - C )
C1.
(page 2 - C )
C1.
Lid with milk frother
C2.
Froth adjustment and CLEAN dial
C3.
Frothed milk spout (adjustable)
C4.
Lid release buttons
C5.
Milk intake tube
C6.
Milk container
C7.
Thermal casing
Description of hot chocolate carafe
(page 2 - D )
D1
(page 2 - D )
D1
Hot chocolate carafe lid
D2.
Funnel
D3.
Steam pipe
D4.
Stirrer
D5.
Hot chocolate carafe
D6.
Funnel release button
Description of hot water/steam spout
(page 2 - E )
E1.
(page 2 - E )
E1.
Release button
E2.
Spout
E3.
Steam nozzle
E4.
Cappuccino maker
Description of the accessories
(page 2 - F )
(page 2 - F )
F1. Pre-ground coffee and hot chocolate powder
measuring spoon
F2.
Cleaning brush
F3.
“Total Hardness Test” indicator paper
F4.
Descaler
F5.
Water softener filter
PRELIMINARY CHECKS
Checking the appliance
After removing the packaging, make sure the product is
complete and undamaged and that all accessories are present.
Do not use the appliance if it is visibly damaged.
Contact De’Longhi Customer Services.
Contact De’Longhi Customer Services.
Installing the appliance
Important!
When you install the appliance, you should respect the
following safety warnings:
• The appliance gives off heat.
After positioning the appliance on the worktop, leave a
space of at least 1.18 in / 3 cm between the surfaces of
the appliance and the side and rear walls and at least 5.9
in/ 15 cm above the coffee maker.
• Water infiltration could damage the appliance and cause
electric shock.
Do not place the appliance near taps or sinks.
• The appliance could be damaged if the water it contains
freezes.
Do not install the appliance in a room where the
temperature could drop below freezing point.
• Arrange the power cable in such a way that it cannot be
damaged by sharp edges or contact with hot surfaces
(e.g. electric hot plates).
(e.g. electric hot plates).
Connecting the appliance
Important!
Check that the mains power supply voltage corresponds to
the value indicated on the rating plate on the bottom of the
appliance.
If the power socket does not match the plug on the appliance,
have the socket replaced with a suitable type by a qualified
professional.
the value indicated on the rating plate on the bottom of the
appliance.
If the power socket does not match the plug on the appliance,
have the socket replaced with a suitable type by a qualified
professional.
Using the appliance for the first time
Please note :
• Coffee has been used to factory test the appliance and it
is therefore completely normal for there to be traces of
coffee in the grinder.
coffee in the grinder.
The machine is, however, guaranteed to be new.
• You should customise water hardness as soon as possible
following the instructions in the section “Setting water
hardness” (page 21).
hardness” (page 21).
1. Plug the appliance into the mains socket and place the
main switch on the back of the appliance in the I position
(fig. 1).
(fig. 1).
You must first choose the language (the languages scroll
through at intervals of about 3 seconds):
2. When “English” appears, press and hold the OK icon (fig.
through at intervals of about 3 seconds):
2. When “English” appears, press and hold the OK icon (fig.
2) for a few seconds until “English set” is displayed.
Follow the instructions indicated by the appliance:
3.
3.
FILL WATER TANK!”: remove the
water tank, fill to the MAX line with
fresh water then replace in the
appliance (fig. 3).
water tank, fill to the MAX line with
fresh water then replace in the
appliance (fig. 3).