Dayton 5S1792 User Manual

Operating Instructions & Parts Manual

Dayton Portable
Oil-Fired Heaters

Form 5S1792

Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or
property damage! Retain instructions for future reference.

Unpacking

1. Remove all packing items supplied

with heater for shipment.

2. Remove all items from carton.

3. Check heater for any shipping

damage. If heater is damaged,
promptly inform dealer where you
purchased heater.

2E510F, 2E511F, 3E218F, and 3E219F

Version B - For Reduction

G016.J

Figure 1 – Models 2E510F and 2E511F

Figure 2 – Models 3E218F and 3E219F

Description

Dayton Models 2E510F, 2E511F, 3E218F, and 3E219F are 40,000 to 155,000 Btu/Hr
heaters. These heaters use only Kerosene, #1/#2 diesel/fuel oil, JET A or JP-8 fuels
for combustion and electricity to run the motor. They are primarily intended for
indoor and outdoor temporary heating of well-ventilated buildings under
construction, alteration, or repair. They may be used in agricultural, industrial,
and commercial environments. Products of combustion are vented into the
area being heated.

Printed in U.S.A.
03430
0403/114/VCPVP

General Specifications

Model 2E510F

Model 2E511F

Model 3E218F

Model 3E219F

Output Rating

40,000 Btu/Hr

60,000 Btu/Hr

110,000 Btu/Hr

155,000 Btu/Hr

Fuel

Kerosene, #1/#2 diesel/fuel oil, JET A or JP-8 fuels

Fuel Tank Capacity

3.0 U.S. Gallons

5.0 U.S. Gallons

9.0 U.S. Gallons

13.5 U.S. Gallons

Fuel Consumption

0.3 U.S. Gallons/Hr

0.44 U.S. Gallons/Hr 0.8 U.S. Gallons/Hr

1.14 U.S. Gallons/Hr

Motor

1725 RPM

3450 RPM

Hot Air Output (CFM)

170

180

490

550

Air Pump Pressure

3.0 psi

3.4 psi

5.1 psi

5.9 psi

Shipping Weight

32 Lb

33 Lb

54 Lb

63 Lb

Heater Weight without Fuel

28 Lb

29 Lb

46 Lb

54 Lb