DataVideo MP-6000 Mk2 User Manual

26

If you are recording from a tape start the tape playing, the video image should appear on the TV monitor 

connected to the MP 6000 output. If you are recording a live image from a camera you should be able to 

see the image from the camera on the TV monitor connected to the MP 6000 output. 

If necessary you can adjust the Brightness, Contrast, Color and Tint (NTSC Only) of the video image, this 

is covered in the chapter “Color Correction”. You also have an Audio Input setting that can adjust the 

volume of the audio prior to recording, see the chapter “Audio Level Adjustment” for more details. 

We will first look at recording from an analogue video input (Composite Video, S-Video, Y U V); recording 

from DV is a little different, so we will look at that, in more detail in another chapter. 

To start recording press and hold the Rec button, then while still holding it down press the Play button 

The LCD should go to the Record Display and On-Screen there should be a Rec indicator, such as this: 

LCD Display 

On-Screen Indicator – In upper left corner of screen

To stop recording press, the Stop button. 

The LCD will return to general display and the On-Screen display will show the Stop Message. 

LCD Display 

On-Screen Display 

The first track of the disc is now completed. You can record more tracks by following the same routine; up 

to 99 tracks can be recorded on a disc.