D-Link XTREME G DWL-G820 User Manual
11
Requirements for using the DWL-G820’s Web
Configuration Utility
Configuration Utility
Using the Configuration Menu
The DWL-G820 must be connected directly to your computer
for configuration. You cannot configure this device if it is
connected to a hub or router.
for configuration. You cannot configure this device if it is
connected to a hub or router.
If you are incorporating the DWL-G820 into a network that contains all D-Link
devices, you do not need to use the Web Configuration utility. With its default
settings, the DWL-G820 will connect with other D-Link 802.11b or 802.11g devices
that are set to their default settings, with no configuration needed!
devices, you do not need to use the Web Configuration utility. With its default
settings, the DWL-G820 will connect with other D-Link 802.11b or 802.11g devices
that are set to their default settings, with no configuration needed!
If your network contains devices other than D-Link devices, or if you wish to configure
the DWL-G820, you will need to do the following before using the Web Configuration
Utility:
the DWL-G820, you will need to do the following before using the Web Configuration
Utility:
You will need a Java-enabled Web browser such as the Internet Explorer
6.0 or later, or the Netscape Navigator 6.0 or later.
6.0 or later, or the Netscape Navigator 6.0 or later.
You will need to assign a static IP address to the computer that you are
using to configure the DWL-G820, within the IP address range of the
DWL-G820. The DWL-G820 has a default IP address of
using to configure the DWL-G820, within the IP address range of the
DWL-G820. The DWL-G820 has a default IP address of
192.168.0.35
with
a subnet mask of 255.255.255.0
You can, for example, assign a static IP address of 192.168.0.2 with a subnet
mask of 255.255.255.0 to the computer you will use for configuration.
(Please refer to the Appendix section of the Quick Installation Guide.)
mask of 255.255.255.0 to the computer you will use for configuration.
(Please refer to the Appendix section of the Quick Installation Guide.)
Factory Default Settings for the DWL-G820
Operating Mode:
Infrastructure
SSID:
default
Channel:
6
Transmission rates:
Auto
Encryption:
Blank (no password needed)
Administrator Password:
No
IP Address Mode:
Static
IP Address:
IP Subnet:
username:
admin
255.255.255.0
192.168.0.35