D-Link DNS327L User Manual
10
D-Link ShareCenter
DNS-327L
User Manual
Section 1 - Product Overview
Rear Panel (Connections)
COMPONENT
DESCRIPTION
Cooling Fan
The cooling fan is used to cool the hard drives and features speed control. When the unit is first powered on, the fans
rotate at a low speed and later rotate at a high speed when the temperature rises above 49 °C.
rotate at a low speed and later rotate at a high speed when the temperature rises above 49 °C.
Gigabit Ethernet Ports
Use the Gigabit Ethernet port to connect the ShareCenter
™
to the local network. The port is equipped with 2 LEDs. The
LED on the left will illuminate solid green for a good connection and will blink during data transmission. If this LED is
off, check the connection/cable to the device you are connecting to. The LED on the right will light solid for a Gigabit
connection and will remain off when connected to a 10/100 device.
off, check the connection/cable to the device you are connecting to. The LED on the right will light solid for a Gigabit
connection and will remain off when connected to a 10/100 device.
Power Receptacle
Connect the supplied power cord to the receptacle.
USB Port
A single USB 3.0 (Type A) connector. The USB Host port is for Print Servers, USB memory disks, or USB UPS monitoring.
Latch
Press the latch to release the Top Panel and insert or remove the hard drives
Security Lock
Prevent theft by tying a cable to the ShareCenter
™
NAS and a desk. Cable is sold separately.
Top Panel
Latch
Cooling Fan
Power Receptacle
Gigabit Ethernet Port
USB Port
Security Lock
Label