D-Link DPG-1200 User Manual
0
D-Link DPG-100 User Manual
Appendix B - Networking Basics
Networking Basics
Check your IP Address
After you install your new D-Link PC-on-TV device, by default, the TCP/IP settings should be set to obtain an IP address
from a DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below.
from a DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below.
Click on
Start > Run. In the run box type cmd and click OK.
At the prompt, type
ipconfig and press Enter.
This will display the IP address, subnet mask, and the
default gateway of your adapter.
default gateway of your adapter.
If the address is 0.0.0.0, check your adapter installation,
security settings, and the settings on your router. Some
firewall software programs may block a DHCP request
on newly installed adapters.
security settings, and the settings on your router. Some
firewall software programs may block a DHCP request
on newly installed adapters.
If you are connecting to a wireless network at a hotspot
(e.g. hotel, coffee shop, airport), please contact an
employee or administrator to verify their wireless network
settings.
(e.g. hotel, coffee shop, airport), please contact an
employee or administrator to verify their wireless network
settings.