Datacard Group RL90 User Manual

Using the LCD menus

36                    

RP90 Plus E and RL90 User Guide

Press the MENU key and "User Mode" is displayed on the LCD 
panel. The LCD panel changes to read "Display" within 0.5 
seconds.
Press the ENTER key when "Display" is shown to access display 
settings which include the card counter, LCD contrast, and LCD 
background color. 
Press the MENU key when “Ready” is displayed to access other 
printer settings.
Press the EXIT key at any time to exit the menu system and return 
to "Ready" status.

Speaker

Provides an electronic beep that indicates:

•

An error has happened.

•

Fewer than 20 cards remain in the card hopper.

•

Confirms that settings have been saved.

The speaker function can be turned on or off using the LCD panel.

Many printer settings can be changed using the Status Monitor. See 

Display

Counter

•

Total

•

Head

•

Free

Use the up and down arrow keys to select the card counter type:
•

Total is the default setting, and displays the number of 
cards printed. The Total counter cannot be reset.

•

Head displays the number of complete dye panels. The 
Head counter cannot be reset, however, it automatically 
resets itself when the print head is replaced.

•

The Free counter displays the number of cards that have 
printed. The Free counter can be reset by the user.

Contrast

0

Set the LCD panel contrast using 7 gradations from
-3 (low contrast) to +3 (high contrast). The default setting is 0.

Back Color

SKY BLUE

Choose from eight LCD background colors. Sky blue is the 
default color. Other selections are blue, light blue, green, 
bright green, yellow, purple, and pink.

Counter Reset

OK?

Press ENTER to reset the Free counter.

Cleaning

Rollers

OK?
Magnetic Stripe (MG) 
Head

Start the cleaning function to clean the card feed rollers and 
heated rollers, and to clean the magnetic head when using 
magnetic stripe cards. See 

 for the steps to follow.