Datacard Group RL90 User Manual
Laminator error recovery
62
RP90 Plus E and RL90 User Guide
Laminator error recovery
The laminator LCD panel displays the error.
Card jam
The laminator LCD panel displays the location of the card jam: Card Jam (In),
Card Jam (Middle), or Card Jam (Out). Use the following steps to remove
card jams.
Card Jam (Middle), or Card Jam (Out). Use the following steps to remove
card jams.
1
Open the laminator door by
pulling the top of the door
toward you.
pulling the top of the door
toward you.
2
Turn the take-up knob
clockwise to remove slack in
the laminator material.
clockwise to remove slack in
the laminator material.
3
Press the laminator cartridge
eject button and remove the
laminator cartridge. The
cartridge may be difficult to
remove; pull firmly, but do not
force. If cartridge cannot be
removed, call for service.
eject button and remove the
laminator cartridge. The
cartridge may be difficult to
remove; pull firmly, but do not
force. If cartridge cannot be
removed, call for service.
4
Use a coin to turn the jog dial,
which will move the card. The
jog dial can be turned
clockwise or counterclockwise
depending on the location of
the card.
which will move the card. The
jog dial can be turned
clockwise or counterclockwise
depending on the location of
the card.
5
Remove the jammed card.
The area around the heat
roller is very hot. Be careful
when removing a jammed
card.
The area around the heat
roller is very hot. Be careful
when removing a jammed
card.
Tips – Laminator card jam
•
Make sure that the card
stacker is not blocking the
card discharge slot.
stacker is not blocking the
card discharge slot.
•
The area around the heat
roller is very hot. Be
careful when removing a
jammed card.
roller is very hot. Be
careful when removing a
jammed card.