Garmin 4.4 User Manual
Registering and deleting projectors for monitoring
18
q
You can also carry out this operation by selecting New - Projector (manual
registration)
registration)
from the Edit menu.
B
Enter the IP address of the projector to be registered in the
"IP address" box and then click "Search". When the message
is displayed, click "OK".
"IP address" box and then click "Search". When the message
is displayed, click "OK".
If using a serial W TCP/IP conversion adapter and cable to connect
the projector, select Use Serial W TCP/IP conversion adaptor.,
enter the port number in Port Number, and then click Search.
the projector, select Use Serial W TCP/IP conversion adaptor.,
enter the port number in Port Number, and then click Search.
C
After searching is complete, enter the information for the
projector to be registered while referring to the table below.
projector to be registered while referring to the table below.
D
After entering the details, click "Register" to start the
registration. When the message is displayed, click "OK".
registration. When the message is displayed, click "OK".
The icon(s) of the projector(s) you registered will be displayed in
Grouping view or Detail list view.
Grouping view or Detail list view.
Registering several projectors to a monitoring group
all at once
all at once
Projectors that have been registered can then be registered together into
different groups so that they can be monitored and controlled together.
different groups so that they can be monitored and controlled together.
Furthermore, if you select one of the registered groups as the Parent
group, monitoring and control operations can be carried out for all
projectors in that Parent group.
group, monitoring and control operations can be carried out for all
projectors in that Parent group.
A Parent group can be set for other parent groups, so that a hierarchical
group arrangement can be created.
group arrangement can be created.
Display name
Enter the name of the projector(s) to be displayed
in Grouping view or Detail list view. Up to a
maximum of 32 bytes can be entered. A space
cannot be used as the first character.
in Grouping view or Detail list view. Up to a
maximum of 32 bytes can be entered. A space
cannot be used as the first character.
Display icon
Select the icon(s) to be displayed in Grouping
view or Detail list view.
view or Detail list view.
Parent group
Select when registering a projector in a group. If
no groups have been created, this cannot be
selected.
no groups have been created, this cannot be
selected.
s
Projector
name
name
This shows the name that has been registered on
the projector.
the projector.
IP address
This shows the IP address that you entered in
step 2.
step 2.
Use Serial W
TCP/IP
conversion
adaptor.
TCP/IP
conversion
adaptor.
Select this if using a serial W TCP/IP conversion
adapter to connect the projector.
adapter to connect the projector.
Port Number
If using a serial W TCP/IP conversion adapter to
connect the projector, enter the port number.
connect the projector, enter the port number.
Monitor
Password
Password
If a Monitor Password has been set for the
projector, be sure to enter the Monitor Password
that has been set. If the correct password is not
entered at this time, it will not be possible to
monitor and control the projector even though it
is registered. If using a serial W TCP/IP conversion
adapter to connect the projector, the Monitor
Password security function cannot be used.
projector, be sure to enter the Monitor Password
that has been set. If the correct password is not
entered at this time, it will not be possible to
monitor and control the projector even though it
is registered. If using a serial W TCP/IP conversion
adapter to connect the projector, the Monitor
Password security function cannot be used.
Description
You can enter some kind of memo about the
projector. The details you enter here will be
displayed at the projector properties.
projector. The details you enter here will be
displayed at the projector properties.
Up to a maximum of 60 bytes can be entered.
Monitor
Select this when you want monitoring to start.