LG Security Camera LRN3040N Series User Manual
28
Installation
3
Ins
talla
talla
tion
Device settings
IP Device
• CH: Displays the channel number.
• Name: Enter the channel name.
• Model Name: Displays the model name of IP device.
• MAC: Displays the Mac address of IP device.
• IP: Displays the IP address of IP device.
• HTTP Port: Enter the HTTP port number. HTTPS is not supported.
• Name: Enter the channel name.
• Model Name: Displays the model name of IP device.
• MAC: Displays the Mac address of IP device.
• IP: Displays the IP address of IP device.
• HTTP Port: Enter the HTTP port number. HTTPS is not supported.
•
/ : You can see other options (Driver, Profile1, Profile2,
RTSP Port, RTP Mode, Audio Recording) to click button. To
return previous options, click button.
return previous options, click button.
• Driver: Selects the IP camera driver from the drop-down list.
• Profile1: Select the camera stream on the drop-down box for
• Profile1: Select the camera stream on the drop-down box for
recording.
• Profile2: Select the camera stream on the drop-down box for
streaming. For smooth live playback, the resolution of [Profile2]
set lower than resolution of [Profile1].
set lower than resolution of [Profile1].
NOTE
• When you select full screen mode on the [split mode],
[Profile1] operate for streaming automatically.
• When CPU usage occupies more than 90% and then 1 minute
goes by, connection of [Profile2] is limited for the stability of
system.
system.
• RTSP Port: Enter the RTSP port number.
• RTP Mode: Select the RTP mode from drop-down list.
• Audio Recording: Check the audio recording option.
• Setup: Click the check box of the desired channel and then
• RTP Mode: Select the RTP mode from drop-down list.
• Audio Recording: Check the audio recording option.
• Setup: Click the check box of the desired channel and then
press the [Setup] button. The setup window will be displayed.
Audio/Sensor setting
You can configure this option when you select to [LGE] on the
[Driver] option. Select [Audio/Sensor] tab of the [Setup] window.
Audio/Sensor setting
You can configure this option when you select to [LGE] on the
[Driver] option. Select [Audio/Sensor] tab of the [Setup] window.
- Audio In: Click the check box if you want to send the audio
from the microphone input connector.
- Audio Type: Select the codec when you send the audio from
the microphone input connector.
- Audio Out: Click the check box to output the audio from the
speaker.
- Sensor: Select the sensor number on the drop-down list.
- In Use: Marks up when you want to activate the sensor.
- Sensor Type: Select the sensor type.
- Relay Output: Select the relay output number
- In Use: Marks up when you want to activate the sensor.
- Sensor Type: Select the sensor type.
- Relay Output: Select the relay output number
on the drop-down list.
- Relay Type: Select the relay type.
- Control Duration: Enter the relay time.
- Control Duration: Enter the relay time.
Motion Setting
You can configure this option when you select to [LGE] on the
[Driver] option. Select [Motion] tab of the [Setup] window.
1. Click the [Add] button. The motion detect window is
You can configure this option when you select to [LGE] on the
[Driver] option. Select [Motion] tab of the [Setup] window.
1. Click the [Add] button. The motion detect window is
displayed. You can add the five windows maximum for
motion detection area.
motion detection area.
2. Set the [Sensitivity] option.
3. Click the edge or corner of the window box to adjust the
3. Click the edge or corner of the window box to adjust the
window size for motion detection.
4. Click the [Save] button to save the settings.
Stream Setting
If you select to [LGE] on the [Driver] option, select the [Stream]
tab. When you select [ONVIF] on the [Driver] option, you can
configure the stream setting only. In case of [AXIS], the [Bitrate]
and the [Compression] options are activated only.
Stream Setting
If you select to [LGE] on the [Driver] option, select the [Stream]
tab. When you select [ONVIF] on the [Driver] option, you can
configure the stream setting only. In case of [AXIS], the [Bitrate]
and the [Compression] options are activated only.
- Stream (LGE only): Select the video stream.
- In Use (LGE only): Click to activate the stream function.
- Video Codec: Select the video mode (Codec) from the
- In Use (LGE only): Click to activate the stream function.
- Video Codec: Select the video mode (Codec) from the
dropdown list.
- Resolution: Select the output image size of the camera.
- Frame Rate: Set the frame rate of the image.
- GOP: It means “Group of Pictures”. The higher the GOP, the
- Frame Rate: Set the frame rate of the image.
- GOP: It means “Group of Pictures”. The higher the GOP, the
better is the video quality of the camera. Edit the value of
GOP from 1 to 30. This setting is valid for H.264 video format
only.
GOP from 1 to 30. This setting is valid for H.264 video format
only.
NOTE
It recommended that you set the [GOP] value same as
[Frame Rate].
[Frame Rate].
- GOV (ONVIF only): It means “Group of VOPs”. The VOP is an
image frame in the MPEG-4 video stream. Edit the value of
GOV from 1 to 30.
GOV from 1 to 30.
- Quality: Select the Quality.
- Stream Quality (LGE only): If the [Quality] option set to VBR,
- Stream Quality (LGE only): If the [Quality] option set to VBR,
this option is displayed. Select the stream quality from the
drop down box, the camera supports five types. (Highest,
High, Medium, Low and Lowest)
drop down box, the camera supports five types. (Highest,
High, Medium, Low and Lowest)
- Bitrate: If the [Quality] option set to CBR, this option is
displayed. Edit the bit rate value from 256 kbps to 10 240
kbps.
kbps.
- Compession (AXIS only): Enter the compression ratio of
video. The lower value you set up, the higher definition
picture you get.
picture you get.
• Delete: Click the check box of the desired channel and then
press the [Delete] button. Registered channel of IP Camera will
be deleted.
be deleted.