BMW 2010 Z4 sDrive30i Owner's Manual
59
4.
Turn the cap with the Allen wrench, arrow
1,
and remove it, arrow
2.
5.
Insert the Allen wrench into the opening,
arrow
arrow
1.
6.
Turn the Allen wrench as far as it will go,
arrow
arrow
2. The transmission lock is released.
Do not turn the Allen wrench in the
opposite direction as this may dam-
opposite direction as this may dam-
age the mechanism.
<
7.
Draw the Allen wrench out of the opening.
After parking the vehicle, lock the trans-
mission lock again, refer to Locking man-
mission lock again, refer to Locking man-
ually. Otherwise, there is a danger of the vehicle
rolling.
rolling.
<
Locking manually
1.
Press the button, see arrow.
The transmission lock is locked again.
The transmission lock is locked again.
2.
Clip the sleeve of the selector lever back in
place.
place.
3.
Set the parking brake.
Jump-starting and towing, refer to page
.
Turn signals/
headlamp flasher
1 High beams
2 Headlamp flasher
3 Turn signals
2 Headlamp flasher
3 Turn signals
Using turn signals
Press the lever beyond the resistance point.
To turn off manually, press the lever to the
resistance point.
To turn off manually, press the lever to the
resistance point.
Unusually rapid flashing of the indicator
lamp indicates that a turn signal indicator
lamp indicates that a turn signal indicator
has failed.
<
Indicating a turn briefly
Press the lever as far as the resistance point for
as long as you wish to indicate a turn.
as long as you wish to indicate a turn.
Online Edition for Part no. 01 41 2 602 883 - © 08/09 BMW AG