BMW 2010 750Li Sedan Owner's Manual
Buckling the belt
Make sure you hear the latch plate engage in the
belt buckle.
After the belt is buckled and the door is closed,
the belt is tightened once automatically.
belt buckle.
After the belt is buckled and the door is closed,
the belt is tightened once automatically.
Unbuckling the belt
1.
Hold the belt firmly.
2.
Press the red button in the belt buckle.
3.
Guide the belt back into its reel.
Safety belt reminder for driver's and
front passenger seat
The indicator lamp flashes or lights up
and a signal sounds. Make sure that the
safety belts are positioned correctly.
and a signal sounds. Make sure that the
safety belts are positioned correctly.
The safety belt reminder is active at speeds
above approx. 5 mph/8 km/h. It can also be ac‐
tivated if objects are placed on the front pas‐
senger seat.
above approx. 5 mph/8 km/h. It can also be ac‐
tivated if objects are placed on the front pas‐
senger seat.
Safety mode
In critical situations, e.g., during full brake appli‐
cation, the front safety belts tighten automati‐
cally.
If the situation passes without an accident oc‐
curring, the belt tension relaxes.
If the belt tension does not loosen automatically,
stop the vehicle and unbuckle the belt using the
red button in the buckle. Fasten the belt before
continuing on your trip.
cation, the front safety belts tighten automati‐
cally.
If the situation passes without an accident oc‐
curring, the belt tension relaxes.
If the belt tension does not loosen automatically,
stop the vehicle and unbuckle the belt using the
red button in the buckle. Fasten the belt before
continuing on your trip.
Damage to safety belts
In the case of strain caused by accidents or
damage:
damage:
Have the safety belts, including the safety belt
tensioners, replaced and have the belt anchors
checked.
tensioners, replaced and have the belt anchors
checked.
Checking and replacing safety belts
Have the work performed only by your au‐
Have the work performed only by your au‐
thorized dealership; otherwise, it cannot be en‐
sured that this safety feature will function prop‐
erly.◀
sured that this safety feature will function prop‐
erly.◀
Front head restraints
Correctly adjusted head restraint
A correctly adjusted head restraint reduces the
risk of injury to cervical vertebrae in the event of
an accident.
risk of injury to cervical vertebrae in the event of
an accident.
Adjusting the head restraint
Correctly adjust the head restraints of all
Correctly adjust the head restraints of all
occupied seats; otherwise, there is an increased
risk of injury in an accident.◀
risk of injury in an accident.◀
Height
Adjust the head restraint so that its center is ap‐
proximately at ear level.
proximately at ear level.
Distance
Adjust the distance so that the head restraint is
as close as possible to the back of the head.
as close as possible to the back of the head.
Active head restraint
In the event of a rear-end collision with a certain
severity, the active head restraint automatically
reduces the distance from the head.
severity, the active head restraint automatically
reduces the distance from the head.
Reduced protective function
▷
Do not use seat or head restraint cov‐
ers.
ers.
▷
Do not hang objects, e.g., clothes hangers,
on the head restraints.
on the head restraints.
▷
Do not attach accessories to the seat or
head restraint.
head restraint.
Otherwise, the protective function of the active
head restraint will be impaired and the personal
safety of the occupants will be endangered.◀
head restraint will be impaired and the personal
safety of the occupants will be endangered.◀
Seite 53
53
Online Edition for Part no. 01 41 2 602 638 - © 09 09 510 BMW AG