BMW 2010 M3 Coupe Owner's Manual

Page of 274
 35
Convenient closing
For Convenient closing, keep your finger on the 
surface, arrow 
2.
Unlocking the trunk lid/tailgate 
separately
Press the button on the outside of the trunk lid/
tailgate. This corresponds to pressing the 
button.
If the vehicle detects that a remote con-
trol has been accidentally left inside the 
locked vehicle's cargo area after the trunk lid/
tailgate or rear window is closed, the lid will 
reopen. The hazard warning flashers flash and 
an acoustic signal
sounds.
<
Switching on radio readiness
Radio readiness is switched on by pressing the 
start/stop button, refer to page
.
Do not depress the brake or the clutch; 
otherwise, the engine will start.
<
Starting the engine
You can start the engine or switch on the igni-
tion when a remote control is inside the vehicle. 
It is not necessary to insert a remote control into 
the ignition lock, refer to page
Switching off the engine in cars with 
automatic transmission
The engine can only be switched off when the 
selector lever is in position P, refer to page
.
To switch the engine off when the selector lever 
is in position N, the remote control must be in 
the ignition lock.
Malfunction
Comfort Access may malfunction due to local 
radio waves. If this happens, open or close the 
vehicle via the buttons on the remote control or 
using the integrated key. To start the engine 
afterward, insert the remote control into the 
ignition lock.
Warning lamps
The warning lamp in the instrument 
cluster lights up when you attempt to 
start the engine: the engine cannot 
be started. The remote control is not inside the 
vehicle or is malfunctioning.
Take the remote control with you inside the 
vehicle or have it checked. If necessary, insert 
another remote control into the ignition lock.
The warning lamp in the instrument 
cluster lights up while the engine is 
running: the remote control is no 
longer inside the vehicle. After the engine is 
switched off, the engine can only be restarted 
within approx. 10 seconds.
The indicator lamp in the instrument 
cluster comes on and a message 
appears on the Control Display: 
replace the battery in the remote control.
Replacing the battery
The remote control for Comfort Access con-
tains a battery that will need to be replaced from 
time to time.
1.
Take the integrated key out of the remote 
control, refer to page
2.
Remove the cover.
3.
Insert the new battery with the plus side fac-
ing up.
4.
Press the cover on to close.
Take the old battery to a battery collec-
tion point or to your BMW center.
<
Online Edition for Part no. 01 41 2 603 066 - © 08/09 BMW AG
Online Edition for Part no. 01 41 2 603 066 - © 08/09 BMW AG