BMW 2009 X6 xDrive50i Owner's Manual
117
>
Individual program
Selecting program
Press the button repeatedly until
the desired program is shown on
the desired program is shown on
the Control Display.
Adjusting air distribution individually –
individual program
The settings are stored in this program.
iDrive, for operating principle refer to page
iDrive, for operating principle refer to page
1.
Press the
button.
This opens the start menu.
2.
Move the controller to the left to open "Cli-
mate".
mate".
3.
Select "Vent settings" and press the con-
troller.
The driver's and front passenger side can
be adjusted separately with the fields on the
right or left side.
troller.
The driver's and front passenger side can
be adjusted separately with the fields on the
right or left side.
4.
Select the driver's or front passenger side
if necessary.
Move the controller to the right or left
repeatedly until the driver's or front passen-
ger side is selected.
if necessary.
Move the controller to the right or left
repeatedly until the driver's or front passen-
ger side is selected.
5.
Select the desired field by moving the con-
troller.
troller.
6.
Turn the controller to adjust the air distribu-
tion.
tion.
Driver's side:
1 Air toward the windshield and side windows
2 Air for the upper body
3 Air to footwell
1 Air toward the windshield and side windows
2 Air for the upper body
3 Air to footwell
Front passenger side:
4 Air for the upper body
5 Air to footwell
4 Air for the upper body
5 Air to footwell
Pressing the AUTO button cancels the
manual air distribution settings.
manual air distribution settings.
<
The automatic mode for the air volume remains
effective with manual air distribution.
effective with manual air distribution.
Switching cooling function on and off
The cooling function cools and
dehumidifies the incoming air
before also reheating it as
dehumidifies the incoming air
before also reheating it as
required, according to the temperature setting.
This function is only available when the engine
is running.
The cooling function helps to avoid condensa-
tion on the window surfaces or to quickly
remove them.
Depending on the weather, the windshield may
fog over briefly when the engine is started.
The cooling function is switched on automati-
cally with the AUTO program.
This function is only available when the engine
is running.
The cooling function helps to avoid condensa-
tion on the window surfaces or to quickly
remove them.
Depending on the weather, the windshield may
fog over briefly when the engine is started.
The cooling function is switched on automati-
cally with the AUTO program.
Maximum cooling
Maximally cooled air is obtained as
quickly as possible at an outside
temperature above approx. 32
quickly as possible at an outside
temperature above approx. 32
7/
0
6 and with the engine running.
The automatic climate control switches into the
recirculated-air mode at the lowest tempera-
ture. The maximum air volume flows out of the
air vents for the upper body. Therefore, open
these vents for maximum cooling.
recirculated-air mode at the lowest tempera-
ture. The maximum air volume flows out of the
air vents for the upper body. Therefore, open
these vents for maximum cooling.
AUC Automatic recirculated-air
control/recirculated-air mode
You can respond to pollutants or
unpleasant odors in the immediate
environment by suspending the
supply of outside air. The system
unpleasant odors in the immediate
environment by suspending the
supply of outside air. The system
then recirculates the air currently within the
vehicle. During AUC operation, a sensor
detects pollutants in the outside air and con-
trols the shut-off automatically.
vehicle. During AUC operation, a sensor
detects pollutants in the outside air and con-
trols the shut-off automatically.
Online Edition for Part no. 01 41 2 600 809 - © 09/08 BMW AG