BMW 2009 X6 xDrive50i Owner's Manual

 131

Do not place heavy or hard objects on the 
roll-up cover. If you do so, they may 

already pose a danger to vehicle occupants dur-
ing braking or evasive maneuvers. 
Do not allow the roll-up cover to snap back, oth-
erwise it can be damaged.

<

1.

Unlock the case with the button, arrow

1.

2.

Swing the case somewhat to the left, 
arrow

2, and remove.

When installing, proceed in the opposite order 
of removal.

1.

Lay on the case on the left-hand side and 
push it forward, arrow

1.

2.

Swing the case toward the inside, refer to 
arrow

2.

3.

Push the case forward at the ends until it 
engages in the two side brackets.

4.

Check whether the case is properly locked 
in place by pulling it with a sudden move-
ment.

Deploy cargo bay cover by pulling back.

Do not place heavy or hard objects on the 
cargo bay cover. If you do so, they may 

pose a danger to vehicle occupants during 
braking or evasive maneuvers.

<

1.

Grasp retracted cargo bay cover under-
neath the upper fold on both sides.

2.

Pull the cover back out of the side brackets.

3.

Depending on your vehicle's equipment 
package, you can store the cover under the 
floor panel in the cargo bay.

Online Edition for Part no. 01 41 2 600 809 - © 09/08 BMW AG