BMW 2009 X6 xDrive50i Owner's Manual
Replacing components
272
Brake force display
1.
Carefully remove the cover in the liftgate
panel with a screwdriver.
panel with a screwdriver.
2.
Rotate the bulb socket to the left and
remove.
remove.
3.
Apply gentle pressure to the bulb while
turning it to the left for removal and replace-
ment.
turning it to the left for removal and replace-
ment.
4.
Insert the bulb socket in the liftgate and
engage it.
engage it.
5.
Before installing the cap, unclip the cargo
bay lamp.
Then lay the cap on its upper side and close
it, refer to arrow.
bay lamp.
Then lay the cap on its upper side and close
it, refer to arrow.
6.
Position the cargo bay lamp and clip it in,
refer to arrow.
refer to arrow.
License plate lamp
5-watt bulb, C11 12W
1.
Slide the lamp to the right with a screw-
driver, refer to arrow
driver, refer to arrow
1.
2.
Remove the lamp, arrow
2.
3.
Replace the bulb.
4.
Reinstall the lamp.
Center brake lamp
This lamp uses LED technology for operation.
In case of a defect, please go to a BMW Sports
Activity Vehicle Center or a workshop that
works according to BMW repair procedures
with correspondingly trained personnel.
In case of a defect, please go to a BMW Sports
Activity Vehicle Center or a workshop that
works according to BMW repair procedures
with correspondingly trained personnel.
BMW X6: changing lamps
Xenon lamps
These bulbs have a very long service life and
the probability of a failure is very low. If one of
these bulbs should nevertheless fail, it is possi-
ble to continue driving with great caution using
the probability of a failure is very low. If one of
these bulbs should nevertheless fail, it is possi-
ble to continue driving with great caution using
Online Edition for Part no. 01 41 2 600 809 - © 09/08 BMW AG